TOGGLE MENU

Beamline Critical Devices

F:MC2BS

Control Device : F:MCCDC

Areas Protected : MC6, MC7, MB7, & MB8

Test Procedure

1. Call up digital status for F:MCCDC.

2. Open F:MC2BS via the critical device controller status page.

3. Verify the digital status for F:MC2BS indicates the beam stop is open.

4. Issue an off command from the digital status page to the critical device controller.

5. Verify the digital status for F:MC2BS indicates the beam stop closed.

6. Document the results in the MCR Logbook.