TOGGLE MENU

Beamline Critical Devices

SY BSF17D

Control Device : S:CRDEV

Areas Protected : TH, Enc. B, C, D, E, & J

Test Procedure

1. Call up digital status for S:CRDEV.

2. Open SY BSF17D by issuing an on command via the digital status page to the critical device controller.

3. Verify the digital status for S:CRDEV indicates the beam stop is open.

4. Issue an off command from the digital status page to the critical device controller.

5. Verify the digital status for S:CRDEV indicates the beam stop SY BSF17D is closed.

6. Document the results in the MCR Logbook.