TOGGLE MENU

Beamline Critical Devices

R:BS10

Control Device : I:MICRD

Areas Protected : MI, F Sector, MI/TeV Crossover, & MI-31

Test Procedure

1. Call up digital status for I:MICRD.

2. Open R:BS10 via the critical device controller status page.

3. Verify the digital status for R:BS10 indicates the beam stop is open.

4. Issue an off command from the digital status page to the critical device controller.

5. Verify the digital status for R:BS10 indicates the beam stop closed.

6. Document the results in the MCR Logbook.